NoiseFit Halo Smartwatch

NoiseFit Halo is presented as a Bluetooth-calling smartwatch, so once it is paired with your phone you can make and take calls from your wrist. It also shows caller-name information for incoming calls and lets you reject a call from the watch, while a Find My Phone feature helps you locate a misplaced handset nearby, keeping you connected without reaching for your phone.

NoiseFit Halo features a vivid 1.43-inch (3.63cm) round AMOLED display with a sharp 466x466 pixel resolution, giving deep blacks and punchy colours that make watch faces and stats pop. It supports cloud-based watch faces, with more than 150 designs available, so you can download and switch looks to match your outfit, mood or activity through the NoiseFit app.

NoiseFit Halo carries an IP68 water-resistance rating, giving it solid protection against sweat, rain and splashes, so you can wear it through workouts and everyday conditions without worry. Even so, IP68 here is not a swimming or diving rating, so it is best to avoid submerging the watch or wearing it in the shower, pool or sea.

NoiseFit Halo has a lightweight polycarbonate case measuring 47.4 x 47.4 x 11 mm and weighing about 56.8 grams with the strap. The slim 11mm profile and light body make it comfortable to wear all day and overnight for sleep tracking, while the 22mm silicone strap keeps it secure and easy to swap, striking a balance between a bold round face and everyday comfort.

Yes, NoiseFit Halo shows push notifications from social and messaging apps you have enabled through the NoiseFit app, so alerts land on your wrist. If they stop arriving, it is usually a Bluetooth issue: keep the watch and phone within range, make sure alerts are switched on in the app with the app locked in the background on Android, and confirm Do Not Disturb is off on the watch.

Yes. As long as your NoiseFit Halo is synced with the NoiseFit app and within Bluetooth range, incoming caller names and messages appear on the watch. To see caller details, turn on the call-notification feature in the app. When a new message arrives you can read it on the watch straight away, and you can also scroll back through previously received notifications later.

NoiseFit Halo pairs with the free NoiseFit app, which is where you set up the watch, view your health data and adjust preferences. To manage your profile, open the app, go to Settings and then Profile, where you can update your personal details and health goals. Keeping this information accurate helps the watch calculate metrics such as calories more precisely.

The NoiseFit app lets you add friends so you can compare activity and stay motivated together. Open the app and go to the Find My Buddy section to connect with people you know. Once linked, you can see how you stack up against them in the Leaders view under Buddy ranking, turning everyday steps and workouts into a friendly competition.

Your workout and activity data from NoiseFit Halo syncs into the NoiseFit app so you can review it in detail. Open the app and go to the Daily Report section, where your daily activity summary is compiled. This lets you follow trends over time across the watch's sports modes, steps, distance and calories, rather than only seeing a snapshot on the watch.

The units of measurement in the NoiseFit app are fixed once first set, so they cannot be switched afterwards between metric and imperial. Because of this, it is worth choosing your preferred units carefully during the initial setup, as distance and other metrics will then be displayed in that system consistently across both the app and the watch.

NoiseFit Halo runs on a 300mAh battery that gives up to 7 days of typical usage per charge. In standby, where the watch functions only as a regular timepiece, that charge can extend to as long as 45 days. Real-world life falls between the two and depends on how much you use the AMOLED display, calling and all-day heart-rate tracking.

Connect the magnetic charging cable to your NoiseFit Halo; a full charge takes about 2 hours, and the watch shows a 100% Charged message when the battery is full. Use a low-power adapter, or plug the cable into a laptop or PC USB port. Avoid fast-charging adapters, as they can damage the watch over the long run.

Checking the remaining charge on your NoiseFit Halo is quick. Wake the watch screen by raising your wrist or tapping it, then swipe up from the watch face to open the quick panel, where the current battery percentage is shown. Keeping an eye on this lets you top the watch up before a long day or a workout so it never runs flat unexpectedly.

A few settings changes noticeably extend how long your NoiseFit Halo lasts between charges. Lower the screen brightness, and because it has an AMOLED panel, turn off the Always On Display so the screen is not lit continuously. Switching off All-Day Heart Rate measurement also helps, since the sensor then runs only when needed rather than around the clock, adding meaningful hours per charge.

NoiseFit Halo works with both iPhone and Android. On Apple devices it supports any iPhone running iOS 11 or later, and on Android it supports phones running Android version 9 or later. As long as your phone meets those versions, it will pair with the watch through the free NoiseFit app to sync data and receive notifications.

Make sure both your NoiseFit Halo and your smartphone are charged and next to each other, then connect the charging cable to power the watch on. Download the NoiseFit app, open it, and allow Bluetooth and GPS positioning when prompted. Enter your personal details and health goals, then open the add-device page, select the device type, and link your Halo to finish pairing.

Most sync and setup problems trace back to a dropped Bluetooth link between the watch and your phone. Keep the NoiseFit app running and locked in the background so the connection stays stable, and keep both devices close together with Bluetooth switched on. If setup still will not complete, reset your NoiseFit Halo and try pairing it again from the beginning.

Missed alerts on your NoiseFit Halo are usually caused by a loss of Bluetooth connectivity with your phone. Check that the two stay within Bluetooth range, that alerts are switched on inside the NoiseFit app, and that the app is running and locked in the background on Android. Also make sure Do Not Disturb mode is turned off on the watch, since that silences alerts too.

Both actions sit in the same menu on the watch. Wake the screen, open Settings, then choose System Settings. To restart, select Reboot and confirm; to switch the watch off completely, select Power Off and confirm instead. A restart is the quicker fix for minor glitches, while a full power-off helps when you are storing the watch or troubleshooting a stubborn problem.

You can reset your NoiseFit Halo directly from the watch. Wake the screen, open Settings, and select System Settings, then go to Reset and confirm. A reset restores the watch to its original state, which is a useful step when setup keeps failing or the watch behaves unexpectedly; afterwards you will need to pair it with the NoiseFit app again.

The SpO2 monitor on NoiseFit Halo measures the oxygen saturation level in your blood, shown as a percentage. Blood-oxygen readings give you a quick sense of how well your body is oxygenated, which some people like to check after exercise or at altitude. You can take a reading from the wrist and review the results in the NoiseFit app.

NoiseFit Halo estimates your calorie burn by combining several inputs rather than movement alone. It factors in your heart rate, how long you have been active, the steps you have taken and the distance covered, together with the height, weight and age you entered in the NoiseFit app. Keeping those personal details accurate makes the calorie estimate more reliable.

NoiseFit Halo measures heart rate either automatically through the day or manually on demand, with the detailed history available in the NoiseFit app. If no reading appears, it is almost always a fit issue: wear the watch snugly with no gap between the sensor and your skin, since the optical sensor needs firm wrist contact. For deeper trends, open the NoiseFit app.

Yes. NoiseFit Halo records your sleep on the watch itself even when it is not actively connected to the NoiseFit app, so you will not lose a night's data if your phone is away. The next time the watch connects, that stored sleep data syncs to the app automatically, and you can also view your daily sleep summary directly on the watch.

Yes, NoiseFit Halo has a built-in pedometer that counts your steps through the day using its accelerometer. Alongside the step tracker it records distance travelled and feeds into your calorie estimate, giving a rounded picture of daily movement. You can glance at your step count on the watch and review the full history and trends in the NoiseFit app.

Yes, NoiseFit Halo includes Female Health Tracking among its health features. Through the NoiseFit app you can log and monitor your menstrual cycle, helping you keep track of periods and related phases alongside the watch's other wellness metrics such as heart rate, SpO2 and sleep, making it a more complete daily health companion.

Yes, NoiseFit Halo comes with a stress monitor. It gauges your stress level so you can see when you may be tense and take a moment to unwind, and it pairs naturally with the watch's Breathe feature for guided breathing exercises. Your stress readings sit alongside heart rate, SpO2 and sleep data in the NoiseFit app for a fuller wellbeing picture.

NoiseFit Halo offers a wide range of sports modes, with the product described as supporting up to 100 modes so you can log everything from walking and running to cycling and more. Beyond dedicated modes it tracks steps, distance travelled, calories burned and activity history through the day, plus a Breathe feature, and all of it syncs into the NoiseFit app to follow your progress.

NoiseFit Halo uses a 22mm silicone strap. To swap it, look on the underside of the watchband for the quick-release mechanism, which lets you detach the current strap and fit a new one without any tools. Replacement and alternative straps can be bought from the official Noise website, so you can refresh the look or replace a worn band easily.

NoiseFit Halo transfers your data to your phone over its Bluetooth connection with the NoiseFit app. As long as the watch is paired and the app is running in the background, your health and activity readings carry across automatically so the app stays current. If figures look out of date, simply opening the app while the watch is nearby triggers a fresh sync.

NoiseFit Halo comes with a 1-year manufacturing warranty that runs from the date the product is delivered to you and covers manufacturing defects under normal use. To activate your cover, register the watch on the Noise warranty registration page after purchase, keeping your order details handy so the warranty is correctly linked to your device.