NoiseFit Force Smartwatch

Yes, NoiseFit Force supports Bluetooth calling, so once it is paired with your phone you can make and take calls straight from your wrist. It also shows caller-name information for incoming calls and lets you reject a call from the watch, and a Find My Phone feature helps you locate a misplaced handset nearby. This makes it easy to stay reachable without reaching for your phone.

NoiseFit Force features a 1.32-inch (3.35cm) round IPS display with a 360x360 pixel resolution and up to 550 nits of brightness, so the screen stays clear and readable even in bright outdoor light. It also supports cloud-based watch faces, letting you download and switch between different designs to match your mood or activity through the NoiseFit app.

NoiseFit Force carries an IP67 water-resistance rating, which means it is protected against sweat, rain and accidental splashes, so you can wear it confidently through workouts and everyday conditions. However, IP67 is not a swimming rating, so you should avoid submerging the watch, wearing it in the shower, or using it in the pool or sea to keep it safe.

NoiseFit Force is built around a rugged design with a case made of zinc alloy and polycarbonate, pairing a metal-alloy feel with a lightweight body. It measures 50mm in diameter and weighs about 53.9 grams with the strap, so it wears as a substantial, sporty watch. The 22mm silicone strap and sturdy construction suit an active, outdoor-oriented lifestyle.

Yes, NoiseFit Force includes an AI Voice Assistant you can trigger from the watch, along with a set of everyday smart tools. You get remote music control and remote camera control for your phone, built-in games, a theatre mode, plus a stopwatch, timer, alarm and wake gesture. Together these turn the watch into a convenient control hub for your phone and daily routine.

Yes, NoiseFit Force displays push notifications from social and messaging apps that you have enabled through the NoiseFit app, so alerts appear on your wrist. If notifications stop coming through, it is usually a Bluetooth issue: keep the watch and phone within range, make sure alerts are switched on in the app with the app locked in the background on Android, and check that Do Not Disturb is turned off on the watch.

Yes. As long as your NoiseFit Force is synced with the NoiseFit app and within Bluetooth range, incoming caller names and messages appear on the watch. To see caller details, turn on the call-notification feature in the app. When a new message arrives you can read it there and then on the watch, and you can also scroll back through previously received notifications later.

NoiseFit Force pairs with the free NoiseFit app, which is where you set up the watch, view your health data and adjust preferences. To manage your profile, open the app, go to Settings and then Profile, where you can update your personal details and health goals. Keeping this information accurate helps the watch calculate metrics like calories more precisely.

Your workout and activity data from NoiseFit Force syncs into the NoiseFit app so you can review it in detail. Open the app and go to the Daily Report section, where your daily activity summary is compiled. This lets you follow trends over time across the watch's sports modes, steps, distance and calories, rather than only seeing a snapshot on the watch itself.

The units of measurement in the NoiseFit app are fixed once they are first set, so they cannot be switched afterwards from metric to imperial or vice versa. Because of this, it is worth choosing your preferred units carefully during initial setup, as distance, and other metrics will be displayed in that system across both the app and the watch thereafter.

NoiseFit Force is powered by a 300mAh battery that delivers up to 7 days of typical usage on a single charge. In standby, where the watch is used only as a regular timepiece, that same charge can stretch to as long as 40 days. Real-world battery life sits between the two depending on how often you use calling, the display and all-day heart-rate tracking.

Connect the supplied magnetic charging cable to your NoiseFit Force; a full charge takes roughly 2 hours, and the watch shows a 100% Charged message once the battery is full. Use a low-power adapter or plug the cable into a laptop or PC USB port. Avoid fast-charging adapters, as they can damage the watch over the long run.

Checking the remaining charge on your NoiseFit Force takes just a second. Wake the watch screen by raising your wrist or tapping it, then swipe up from the watch face to open the quick panel, where the current battery percentage is displayed. Keeping an eye on this lets you top the watch up before a long day or a workout so it never runs flat mid-use.

A few simple settings changes noticeably stretch how long your NoiseFit Force lasts between charges. Lower the screen brightness from the watch settings, since the 550-nit display is one of the biggest power draws, and turn off All-Day Heart Rate measurement so the sensor is not running continuously. Together these reduce background activity and can add meaningful hours to each charge.

NoiseFit Force works with both iPhone and Android. On Apple devices it supports any iPhone running iOS 10 or later, and on Android it supports phones running Android version 5 or later. These are fairly low OS floors, so the watch pairs with the vast majority of smartphones in use through the free NoiseFit app.

First make sure both your NoiseFit Force and your smartphone are charged and next to each other, then connect the charging cable to power the watch on. Download the NoiseFit app, open it, and allow Bluetooth and GPS positioning when prompted. Enter your personal details and health goals, then go to the add-device page, select the device type, and link your Force to complete pairing.

Most sync and setup failures come down to a dropped Bluetooth link between the watch and your phone. Keep the NoiseFit app running and locked in the background so the connection stays stable, and make sure both devices are close together with Bluetooth on. If setup still will not complete, reset your NoiseFit Force and try pairing it again from the start.

Missed alerts are usually caused by a loss of Bluetooth connectivity between your Force and your phone. Check that the two are within Bluetooth range, that alerts are switched on inside the NoiseFit app, and that the app is running and locked in the background on Android. Finally, confirm that Do Not Disturb mode is turned off on the watch, as that also silences alerts.

Both actions live in the same menu on the watch. Wake the screen, open Settings, then select System Settings. To restart, choose Reboot and confirm; to switch the watch off completely, choose Power Off and confirm instead. Restarting is the quicker fix for minor glitches, while a full power-off is useful when you are storing the watch or troubleshooting a stubborn issue.

You can reset your NoiseFit Force directly from the watch itself. Wake the screen, open Settings, and select System Settings, then go to Reset and confirm the choice. A reset restores the watch to its original state, so it is a useful step when setup keeps failing or the watch is behaving unexpectedly; you will need to pair it with the NoiseFit app again afterwards.

Yes, NoiseFit Force includes a female cycle tracker as part of its health features. Through the NoiseFit app you can log and monitor your menstrual cycle, helping you keep track of periods and related phases alongside the watch's other wellness metrics. This makes it a more complete daily health companion rather than a step-and-heart-rate tracker alone.

The SpO2 monitor on NoiseFit Force measures the oxygen saturation level in your blood, expressed as a percentage. Blood-oxygen readings give you a quick sense of how well your body is oxygenated, which some people like to check after exertion or at altitude. On Force you can take a reading from the wrist and review the data in the NoiseFit app.

NoiseFit Force estimates your calorie burn by combining several inputs rather than relying on movement alone. It factors in your heart rate, how long you have been active, the steps you have taken and the distance covered, together with the height, weight and age you entered in the NoiseFit app. Keeping those personal details accurate makes the calorie estimate more reliable.

NoiseFit Force measures heart rate either automatically throughout the day or manually on demand, with the detailed history available in the NoiseFit app. If no reading appears, it is almost always a fit issue: wear the watch snugly on your wrist with no gap between the sensor and your skin, since the optical sensor needs firm contact. For deeper trends, open the app.

Yes. NoiseFit Force records your sleep on the watch itself even when it is not actively connected to the NoiseFit app, so you will not lose a night's data if your phone is away. The next time the watch connects, that stored sleep data syncs across to the app automatically, and you can also view your daily sleep summary directly on the watch.

Yes, NoiseFit Force has a built-in pedometer that counts your steps throughout the day using its accelerometer. Alongside the step tracker it records distance travelled and feeds into your calorie estimate, giving you a rounded picture of daily movement. You can glance at your step count on the watch and review the full history and trends in the NoiseFit app.

NoiseFit Force comes with multiple sports modes so you can log different workouts and see stats tailored to each activity. Beyond dedicated modes it tracks your steps, distance travelled, calories burned and activity history through the day, and includes a Breathe feature for guided breathing. All of this data feeds into the NoiseFit app so you can follow your fitness progress over time.

NoiseFit Force uses a 22mm silicone strap. To swap it, look on the underside of the watchband for the quick-release mechanism, which lets you detach the current strap and fit a new one without tools. Replacement and alternative straps can be bought from the official Noise website, so you can refresh the look or replace a worn band easily.

NoiseFit Force transfers your data to your phone over its Bluetooth connection with the NoiseFit app. As long as the watch is paired and the app is running in the background, your health and activity readings are carried across automatically so the app stays up to date. If figures look out of date, opening the app while the watch is nearby prompts a fresh sync.

NoiseFit Force comes with a 1-year manufacturing warranty that runs from the date the product is delivered to you and covers manufacturing defects under normal use. To activate your cover, register the watch on the Noise warranty registration page after purchase, keeping your order details handy so the warranty is correctly linked to your device.