NoiseFit Endeavour Pro Smartwatch

The NoiseFit Endeavour Pro has a full-touch 1.5-inch AMOLED display with a 466 x 466 pixel resolution and up to 1000 nits of brightness, so stats stay sharp and readable even in direct sunlight. To change the brightness, wake the screen, swipe up from the home screen, select Brightness and set the level that suits your surroundings.

Yes. The NoiseFit Endeavour Pro is built to military-grade MIL-STD-810H durability standards and tested for free fall, repeated drops and impact resistance, with a titanium alloy bezel and military-grade glass adding to its rugged build. It is made to survive tough training and outdoor use, but avoid intentionally dropping it from height, as extreme impacts can still cause external damage.

Yes. The NoiseFit Endeavour Pro carries a 5ATM rating, withstanding pressure equivalent to 50 metres of static depth, so you can wear it while swimming and in the shower. It is not made for diving or high-pressure water activities, and you should avoid saunas, hot water and ocean water. Dry the watch and your hands thoroughly before handling it after it gets wet.

The NoiseFit Endeavour Pro packs heart-rate, sleep, stress, SpO₂ and female-cycle tracking sensors, backed by 9-axis motion sensors and ABC tools — altimeter, barometer and compass — for the outdoors. For navigation it uses L1+L5 dual-band GPS with support for five global satellite systems, giving accurate route, distance and pace tracking across runs, rides and hikes without your phone.

Yes. The NoiseFit Endeavour Pro supports Bluetooth calling, so once it is paired with your phone you can take and make calls straight from your wrist. This is handy mid-workout or when your phone is nearby but out of reach, letting you handle calls hands-free while the watch stays connected over Bluetooth within range.

Yes. The NoiseFit Endeavour Pro includes AI voice search, letting you use your voice to look things up and interact with the watch more quickly than tapping through menus. It works alongside the watch's other smart features to help you get information and control functions hands-free while you are on the move.

The NoiseFit Endeavour Pro does not include in-built games, as it is built around training and the outdoors. It can, however, store music (up to 30 songs) on the watch and play it to a Bluetooth headset, and it offers remote music control for audio playing on your phone as long as the watch and phone are within Bluetooth range.

Yes. The NoiseFit Endeavour Pro has a Find My Phone option to help you locate a misplaced handset. Open Settings on the watch and select Find My Phone to make the connected phone ring or alert. This works only while your phone and the watch are paired over Bluetooth and within range of each other.

Yes. The NoiseFit Endeavour Pro has a raise-to-wake gesture that turns on the display when you lift your wrist to check the screen, so you do not need to tap it. You can also adjust the vibration intensity between soft and strong, letting you set alerts and haptics to a level you comfortably notice without being intrusive.

The NoiseFit Endeavour Pro has a Bluetooth range of about 10 metres in open conditions, with walls and obstacles reducing usable distance. Both your earbuds and the watch can be paired to the same smartphone at once, so you can keep the watch connected for notifications and calls while your earbuds handle audio, without having to disconnect one to use the other.

The NoiseFit Endeavour Pro offers 100+ watch faces, and you can even generate your own in the NoiseFit App by entering a prompt. To change a face from the watch, touch and hold the home screen, then swipe to pick one. From the app, open Watch Faces, select your choice and tap Save, where you can also customise faces to your liking.

Once synced with the NoiseFit App and within Bluetooth range, the Endeavour Pro shows notifications for calls, SMS and apps like WhatsApp, Instagram, Facebook, Messenger, X, YouTube, LinkedIn, Gmail, Outlook, Snapchat and Telegram. You can view caller information and read incoming messages on the watch, including previously received ones. If alerts stop, check that Bluetooth is connected, notification and call permissions are on in the app, DND is off, and the app is running in the background.

The NoiseFit Endeavour Pro connects through the NoiseFit App. From it you can manage your profile under My Device and Device Settings, and review your workouts and daily activity in the Daily Report on the Home page, which also syncs with Strava and Apple Health. Note that the measurement units are fixed once set during initial setup and cannot be changed later in the app.

Powered by a 530 mAh battery, the NoiseFit Endeavour Pro delivers up to 10 days of use and up to 28 days of standby, with real runtime depending on GPS, brightness and always-on sensors. A full charge takes about two hours and the watch shows a 100% message when done. Use a low-power 5V/1A adapter or a laptop/PC USB port, and avoid fast chargers, which can damage it over time.

To check the charge on the NoiseFit Endeavour Pro, wake the screen and swipe up to see the current battery level. To make a charge last longer, lower the screen brightness and vibration intensity and turn off All-Day Heart Rate measurement; limiting GPS use also helps significantly, since continuous satellite tracking is one of the biggest drains on a full charge.

The NoiseFit Endeavour Pro works with both iPhone and Android phones through the NoiseFit App. It supports iPhones running ios 17.0 and above and Android smartphones running Android 9.0 and above. For the full experience, including notifications, workout syncing and firmware updates, install the NoiseFit App and keep Bluetooth enabled on a supported device.

Make sure your phone and the watch are charged and kept close together, connecting the charging cable to power the watch on if needed. Download the NoiseFit App, open it and allow Bluetooth and Location services. Enter your personal details and health goals, then go to the add-device page, select the device type and link the Endeavour Pro to finish pairing and syncing.

Sync problems are usually a lost Bluetooth link, so keep the watch and phone in range and make sure the NoiseFit App is running and locked in the background. If setup itself fails, reset the Endeavour Pro from its Settings menu and try pairing again from the app. Confirming Bluetooth and Location permissions are enabled also helps the process complete cleanly.

All three are done from the watch's Settings, reached by waking the screen and swiping up. Select Reboot to restart the watch while keeping your data, or Power Off to switch it off completely. To reset, choose Reset and confirm; note that a reset restores factory defaults and clears the watch's data, so use it only for troubleshooting or before passing the device on.

The NoiseFit Endeavour Pro covers a broad range of wellness metrics: SpO₂ (blood-oxygen), stress, female health and cycle tracking, and an in-built pedometer for daily steps. It tracks sleep even when the watch is not connected to your phone, showing daily sleep data on the watch and syncing the details to the NoiseFit App once you reconnect, so nothing is lost overnight.

The Endeavour Pro measures heart rate manually or automatically and shows detailed trends in the NoiseFit App. From this it estimates calories burned using your heart rate, activity duration, steps, distance and your height, weight and age. If no heart-rate reading appears, make sure the watch is worn snugly against your wrist with no gap, as a loose fit prevents the optical sensor from reading accurately.

The NoiseFit Endeavour Pro uses 22 mm straps. To change a band, use the quick-release mechanism on the underside of the strap where it meets the watch body to detach and attach a new one. Genuine replacement straps can be purchased from the official Noise website at gonoise.com, where you can choose the options offered for this model.

The NoiseFit Endeavour Pro syncs your activity, workout and health data over Bluetooth with the NoiseFit App on your phone. For reliable, up-to-date syncing, keep Bluetooth on, the watch within range and the app running and locked in the background, so your steps, heart rate, sleep and GPS activities transfer automatically without you having to trigger each update.

Yes. The NoiseFit Endeavour Pro comes with a 1-year manufacturer's warranty covering manufacturing defects, calculated from the date of delivery. To activate coverage, register your product at gonoise.com/pages/warranty-registration and keep your order details or invoice handy in case you need to raise a service request during the warranty period.