The ColorFit Nav's 1.4” LCD display with a resolution of 320 x 320 pixels and a smudge-resistant oleophobic coating lets you see more, and do more.
With built-in GPS and a 6 axis sensor, view paths of your completed workouts and get real-time speed and distance covered. Get full progress reports of your favourite indoor and outdoor sports modes. Track your moves like never before.
Real-time speed & distance tracking
Built-in GPS sensor
Route map visualisation
Monitor your health all day long
with the built-in optical HR-sensor
and when it gets too much, just take
a deep breath and unwind.
Receive alerts on your ColorFit Nav for calls, texts and social media notifications. Set quick replies and speak your mind without reaching out for your phone.
*Available in Android only
*Available via OTA Updates
Go up to 4 days without worrying about a recharge.
With an IP68 rating, rain or sweat won’t hurt you. Neither will germs, with hourly hand wash reminders.
ColorFit Nav smartwatch
Thank you card
Our products go through multiple levels of Quality Check to ensure that you get the best. But in case, you have any issue with the product, we provide 1 year of manufacturer warranty and excellent customer service.
Yes, Colorfit Nav features a full touchscreen display.
Yes. Colorfit Nav has an IP68 rating. It can go underwater up to a depth of 1.5m for up to 30 minutes. However, avoid saunas, hot water and ocean water.
No, you cannot use your Noise Colorfit Nav while swimming. The Colorfit Nav is IP68 rated and splash resistant only.
Colorfit Nav does not feature a camera. However, it comes with a remote camera control feature that lets you capture images as long as the device’s camera is turned on and both the devices are in Bluetooth range.
Yes, you can reject calls from the smartwatch.
Yes. Turn on the watch screen. Swipe down, select Find my Phone. However, this will only work if your phone and smartwatch are connected via Bluetooth and in range.
No, Colorfit Nav does not come with a Gesture control that turns on the display when you raise your wrist to look at the screen.
Colorfit Nav has a remote music control feature that controls music playing on your phone as long as your smartphone and smartwatch are in BT range. However, it cannot be used to store music.
Colorfit Nav cannot play music through a Bluetooth headset.
No, Colorfit Nav has an always-on screen. Go to wake settings in your phone. Turn on the lift to wake and set the screen out time or keep it always on.
Yes, you can change the watch faces.
Go to watch face in the NoiseFit X app. Choose the watch face of your choice and set it as your watch face. You can even customize your watch face.
See how it's done in this video
Go to Stopwatch on your smartwatch. Press play to start. Press lap to create laps. Press play again to pause. Tap stopwatch to go back
See how it's done in this video
Colorfit Nav features In-Built GPS, Heart Rate Sensor, 6 Axis Accelerometer (3 axis accelerometer and 3 axis gyroscope) sensors.
Colorfit Nav does have a standalone GPS. However, it can track your location during workout as long as you turn on the GPS in your smartwatch.
Colorfit Nav comes with one user manual, one magnetic charging dock and one charging cable.
Long press the upper side button to turn on the watch.
Choose the language
Download the Noise Fit X app
Select Colorfit NAV and confirm.
Scan the QR code from your phone and confirm pair.
See how it's done in this video
This may be because it lost Bluetooth connectivity with your smartphone. For a stable connection, please ensure that the NoiseFit X app is running and locked in the background (Android only).
Restart your Colorfit Nav and try again.
Possibly due to Bluetooth connectivity loss. Ensure that your watch & phone are within Bluetooth range with the alerts turned on in the App, which is kept running & locked in the background (Android). Also check if the DND is turned on or not.
You can restart your Colorfit Nav smartwatch by following these steps. Turn on the watch screen
Swipe up, select Settings. Go to restart and choose to restart.
It features a 180mAh battery with up to 4-day battery life & 30-day standby.
Stand-by time is the maximum tested time that a single charge will last when the smartwatch is used as a regular watch.
Colorfit Nav takes approximately 3 hours to charge completely. It will display a 100% Charged message once the battery is at full capacity.
Turn on the screen and swipe up to check the battery level on your Colorfit Nav.
You can extend the battery life in your device by turning down the brightness level, by turning off the always on feature and turning off the All-Day Heart Rate measurement.
Colorfit Nav syncs data over a Bluetooth connection with NoiseFit X app.
The name of the app is NoiseFit X.
You can manage the NoiseFit X profile from the app. Open the App. Head to the name section of the app and agree to the T&C. Sign up as the first-time user. Feed in your personal info.
You cannot connect with friends on your NoiseFit X app. However, you can check/compare the progress report with your friend.
You can compare with friends under the leaders under buddy ranking
You can track your workout on the daily report section of the app.
Open the NoiseFit X app. Go to the daily report section of the page and get your daily report.
You can change the units of measurement on your NoiseFit X app. Open the App and go to Device then go to settings and then into Device Unit. Choose the unit setting.
Colorfit Nav shows push notifications from social networking apps that have been synced with the NoiseFit X. Please ensure that the NoiseFit X app is running and locked in the background (Android).
Possibly due to Bluetooth connectivity loss. Ensure that your watch & phone are within Bluetooth range with the alerts turned on in the app, which is kept running & locked in the background (Android). Also check whether the DND in the smartwatch is turned on or not.
Yes, you can see messages and caller information on your smartwatch as long as the watch is synced with the NoiseFit X app and is within Bluetooth range.
Turn on the call notification feature on the NoiseFit X app to see incoming call information.
You will be notified of new messages on your Colorfit Nav once it is connected with the NoiseFit X app. You can read the message at the time you receive a notification. You also have the option to see previously received notifications and reply to the messages (for android only)
Colorfit Nav estimates the number of calories burned based on your activity duration, steps taken, distance covered, height, weight and age.
Colorfit Nav can detect heart rate both manually or automatically. You can track your heart rate with NoiseFit X App.
You can see heart rate on your Colorfit Nav smartwatch provided you are wearing it on your wrist and there is no space between watch and wrist. For detailed analysis, you can check the NoiseFit X app.
Yes, Colorfit Nav will measure your sleep even if not connected with App. The data will be synced to the app, once connected. You can also view your daily and weekly sleep data on your smartwatch.
Yes, Colorfit Nav comes with an in-built pedometer.
Colorfit Nav is compatible with all iPhones running on iOS 9 and above.
Colorfit Nav is compatible with all Android phones running on Android version 4.4 and above.
The mechanism to remove and replace the band can be found on the underside of the watchband.
You can purchase replacement straps from our official website.
Explore More Noise Gadgets Below:
Fill in your details and we’ll let you know as soon as we’re able to ship. In the meantime, follow us on Instagram to stay connected.
Thanks, we’ll get in touch as soon as the lockdown ends!
#StayHome #StaySafe & #KeepTheNoiseUp